제품 애플리케이션
• Used for cable fire prevention, to strengthen the fireproof performance of cable sheath;
• Suitable for additional insulation and cable parts prone to failure where there are fire hazards;
• Suitable for high and low-voltage power supply lines, especially fire retardant engineering of cables laid under environmental conditions such as channel, tunnel, and overhead in power plants, substations, iron and steel, chemical industry, construction, subways, mines, and ships;
• Applicable to all forms of fire spreading, effectively isolating fire spreading.
제품 기술 지표
사양: X-FHD-108 |
|||
재산 |
값 |
단위 |
시험 방법 |
물리적 재산 |
|||
인장강도 | ≥3 | MPa | GB/T 528-2009 |
휴식시 신장 | ≥500 | MPa | GB/T 528-2009 |
인장강도 변화율 | ≤±20% | --- | GB/T2951.12-2008 |
파단시 신장율 변화 | ≤±20% | --- | GB/T 2951.12-2008 |
방수 | 15일 침수시 기포 없음, 주름 박리, 갈라짐 등 현상 없음 | — | Ga478-2004 |
내산성, 내알칼리성, 내염성 | 7일 침수시 기포, 주름, 박리, 갈라짐 등의 현상이 발생하지 않음 | — | Ga478-2004 |
자기점도 | 24시간 동안 풀리지 않음 | — | Ga478-2004 |
산소지수 |
≥32 |
% | GB/T 2046.2-2009 |
난연 등급 | V-0 | — | UL94-2015 |
할로겐 함량 |
브롬과 염소의 함량은 각각 900ppm 미만이다. 브롬+염소의 총 함량이 1500ppm 미만입니다. |
— | EN14582:2016 |
연기 밀도 등급 | ≤15 | — | GB/T 8627-2007 |
표의 데이터는 평균 테스트 결과를 나타내며 사양 목적으로 사용되지 않습니다. 제품 사용자는 제품을 결정하기 위해 자신의 테스트를 수행해야 합니다. 제품이 의도된 용도에 적합한지 확인해야 합니다. |
제품 일반사양
표준 크기: | ||
너비 |
길이 |
두께 |
60mm |
5m | 0.7mm |
다른 크기와 코어도 사용할 수 있습니다. 공장에 문의하세요 |
제품 표시하다